خبى REKING WIRE MESH CO.، LTD
شبكة الطباعة الشاشة وشبكة تصفية مع مادة الفولاذ المقاوم للصدأ والبوليستر والنايلون
خبى REKING WIRE MESH CO.، LTD
شبكة الطباعة الشاشة وشبكة تصفية مع مادة الفولاذ المقاوم للصدأ والبوليستر والنايلون
تفاصيل المنتج:
شروط الدفع والشحن:
|
مواد: | 316 الفولاذ المقاوم للصدأ | عرض: | كشرط |
---|---|---|---|
الطول: | كشرط | اللون: | فضة |
تطبيق: | منقي | نسج النمط: | نسج عادي |
شكل: | دائري ، مربع ، أو حسب الطلب | اسم المنتج: | شبكة متكلس |
تسليط الضوء: | sintered stainless steel sheet, sintered metal disc,sintered metal disc |
500 micron ultra fine stainless steel porous sintered knitted Wire Mesh screen
Description of stainless steel sintered mesh round for filter plate
5-layer sintered stainless steel mesh
It is our standard sintered mesh structure. A single layer of fine wire mesh was placed between two thicker square woven meshes, which were then added to two layers of strong Dutch woven wire mesh and sintered together to form a sturdy board. A single layer of fine wire mesh acts as a filter layer that can be customized to meet specific filtration levels, ranging from 5 microns to 300 microns. It can then be cut and made into a variety of discs, tubes, cartridges and plates.
Filter sintered mesh material
AISI304, AISI304L; AISI316; AISI316L >>Check chemical composition
Special alloy steel Hastelloy, Monel, Inconel and Titanium alloy can be customized according to customer requirements
Filter size
Standard sizes: 500x1000mm, 600x1200mm and 1000x1000mm, 1200x1200mm, and other sizes.
Filtering technology expression
Initial bubble point pressure
The bubble is the minimum pressure required to force the gas to impregnate the porous material Pa through the liquid.
Average aperture
The average pore size as determined by the foam principle, in μm.
Relative permeability coefficient
Unit differential pressure, fluid volume flows through the filter element per unit area, the unit is L / min.cm2.Pa.
Viscous permeability coefficient
Dynamic Viscosity Unit of Fluid When the fluid resistance is formed only by viscous losses, the unit pressure gradient, volume flow rate through the filter element per unit area in m2.
Note: This list for a reference, not for the complete list.
Nomin al filter rating |
structure prodextive layer+control layer +dispersion layer+ reinforce layer+ reinforce layer |
Thickness(mm) | air perm eabilit | Bubble pressure(mm) | weight (kg/m2) |
porosity (%) |
1 | 100+400*2800+100+12*64+64 | 1.7 | 1.81 | 360-600 | 5 layer 8.4 | 40% |
5 | 100+200*1400+100+12*64+64 | 1.7 | 2.42 | 260-550 | 6 layer 14.4 | 40% |
20 | 100+165*800+100+12*64+64* | 1.7 | 4.5 | 170-450 | 40% | |
200 | 40+80+40+20+40+80+40 | 2 | 26 | 50-150 | 40% |
اتصل شخص: Gerry Cui
الهاتف :: +8613333017371
عالية الدقة 635 شبكة 304 شبكة طباعة الشاشة الفولاذ المقاوم للصدأ
انخفاض Elongatation أسلاك الفولاذ المقاوم للصدأ شبكة القماش OEM / ODM مقبول
316 شبكة الفولاذ المقاوم للصدأ طباعة الشاشة لفة مع ارتفاع التوتر تستخدم لطباعة مستحضرات التجميل
شبكة طباعة الشاشة البوليستر حيدة النسيج
200 شبكة طباعة الشاشة البوليستر شبكة لثنائي الفينيل متعدد الكلور
انخفاض مرونة البوليستر شاشة شبكة الطباعة لعرض الكريستال السائل
شبكة طباعة الشاشة عالية التوتر 110
المهنية 110 البوليستر حيدة مش قضيب القماش لطباعة الشاشة
متعددة الوظائف 110 شاشة شبكة الطباعة لطباعة المكونات الإلكترونية